• Switch 1.2
• Product Overview
  • Technical Specifications
  • Supported SonicWall and 3rd party SFP and SFP+ Modules that can be used with SonicWall Switches
  • Physical Interface - 10 Port Switch
  • Physical Interface - 24 Port Switch
  • Physical Interface - 48 Port Switch
  • Physical Interface - 8 Port Switch
  • Management Interface
  • Connecting the Switch to a Network
  • Web Access
• System Management
  • System
    • Dashboard
    • Network
    • Administration
      • SSH Settings
    • System Information
    • User Management
    • Simple Network Management Protocol
      • Classic diagram of SonicWall Switch for SNMP Testing
      • Add View List
      • Add Target Params
      • Add Target Address
      • Add Notify Setting
      • SNMP Traps/Informs
      • How to configure SNMP on SonicWall Switch
      • SNMP supported OID’s in 1.2.0.1-2s
      • How to Configure SNMP/MIB Browser on Client PC
    • Address Resolution Protocol
      • ARP Table
      • ARP Statistics
    • Authentication
    • Firmware and Settings
    • DHCP Snooping
    • DHCP Relay
    • Time
  • Switching
    • Port Settings
      • Port Settings
        • Native VLAN
      • QoS Settings
        • Bandwidth Control
        • Storm Control
      • PoE
      • Security
        • 802.1X
      • ACL Binding
      • Advanced
    • Spanning Tree Protocol
      • Network Loops
      • Global Settings
      • MST Instance Settings
      • STP Port Statistics
    • Loopback Detection
    • Link Aggregation
      • Port Trunking
      • Link Aggregation Control Protocol Settings
      • Link Aggregation Control Protocol Timeout
    • Port Mirror
    • Jumbo Frames
    • MAC Address Table
      • Dynamic MAC Address
    • Link Layer Discovery Protocol
      • Local Device
      • Remote Device
    • IGMP Snooping
      • Global Settings
      • Group List
      • Router Settings
    • Multicast Filtering
    • Quality of Service
      • Class of Service Mapping
      • IP/DSCP Mapping
      • Class Mapping
        • Adding a Class Policy
      • Policy Mapping
    • Remote Network Monitoring
      • Stat List
      • Event List
      • Event Log Table
      • Statistics
      • Alarm List
      • History List
      • History Log Table
    • Port Statistics
  • Routing
  • Security
    • 802.1X Security
      • Mac Authentication Bypass
        • Behaviors and Restrictions
      • Global Settings
      • Port Settings
      • Authenticated Host
      • Port Statistics
    • Denial of Service
    • ACL Management
      • MAC ACL
      • MAC-Based ACE
      • IPv4 ACL
      • IPv4-Based ACE
  • VLAN
    • 802.1Q
    • Voice VLAN
      • OUI Settings
      • Port Settings
  • Logging
    • Global Settings
      • Local Settings
    • Remote Logging
    • Log Table
  • Diagnostics
    • Ping
    • Trace Route
    • Download required tech support files
• System Maintenance
• Switch Troubleshooting
  • Communication flow between Firewall and Switch before it get authenticated
• SonicWall Support
  • About This Document

Switch Troubleshooting

Steps to create VLAN from WNM on the switch

• Log into the WCM portal

• Make sure the switches are part of zones and online in the Device section.

• To ensure Navigate to Network>>Zones.

  

• Navigate to Network>>Devices>>Switches>>edit>>VLAN.

  This only if you have 1 switch and not using the switch policy.

  

• If you have More than 1 Switch then make use of switch policies, for this Navigate to Policies>>Switch Policies, Click on Add.

  

• Now Go to VLAN, select the switch model to which you want to add VLAN, Click on Add VLAN settings.