Switch Administration Guide
- Switch 1.2
- Product Overview
- Technical Specifications
- Supported SonicWall and 3rd party SFP and SFP+ Modules that can be used with SonicWall Switches
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Physical Interface - 8 Port Switch
- Management Interface
- Connecting the Switch to a Network
- Web Access
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
Add Target Address
On Target Address option, the maximum entries of Target Address is 10.
Click on Add Target Address.
Target Address Name | Custom string with 1-32 characters |
IP Address | String in IP format. |
UDP Port | Number in 1-65535 |
Timeout |
Number in 1-300 |
Retry |
Number in 1-255 |
Tag Identifier |
Custom string with 1-20 characters. |
Target Parameter |
|
Click Apply to accept the changes or Cancel to discard them.
Was This Article Helpful?
Help us to improve our support portal