Switch Administration Guide

Download PDF
Technical Documentation > Switch Administration Guide > System Management > Switching > Port Mirror

Port Mirror

Port Mirroring allows the sending of a copy of network packets seen on one or more switch ports to another switch port called the mirror port. By connecting to the mirror port, you can monitor traffic passing through the mirrored ports.

Session ID

Displays the three sessions.
Destination Port Displays the destination port to which the traffic is monitored.
Source Ingress Displays the port for which incoming traffic is mirrored as part of a port mirroring configuration.
Source Egress Displays the port for which outgoing traffic is mirrored as part of a port mirroring configuration.
Ingress State Displays the state, either enable or disable of the ingress traffic
Session State Displays the session state, either the port mirror is enabled or disabled.
Action Allows to edit the port mirror entries like session state, destination port, source TX and RX port and ingress state.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden