Switch Administration Guide
- Switch 1.3.0
- Product Overview
- Package Contents
- Technical Specifications
- Supported SonicWall and third-party SFP and SFP+ Modules
- Physical Interface - 8 Port Switch
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Device Management
- Connecting the Switch to a Network
- Capacity Matrix
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
Dashboard
The Dashboard screen contains general device information about the Switch, including the device name, Firmware version, MAC address, and System Uptime.
|
Device Name |
Displays the device name of the Switch. |
| Model | Displays the model name of the Switch. |
|
Firmware version |
Displays the installed firmware version of the Switch. |
|
Serial Number |
Displays the serial number of the Switch. |
| Authentication Code | Displays an 8-character code that acts as a hardware identifier of the Switch |
| Registration Code | Displays the code generated when the Switch is registered and will be available in MySonicWall. |
|
Base MAC address |
Displays the MAC address of the device. |
| System Time | Displays the system time in the following format: day, month, date, year, hour, minute, seconds. |
|
System Uptime |
Displays the amount of time since the most recent device reset. hours, and minutes. For example, the display will read: 3 days, 6 hours, 10 minutes. |
| Fan Status | Displays the fan status of the Switch. |
| CPU utilization | Displays the utilization of CPU in percentage. |
| RAM | Displays the RAM usage. |
| PoE power | Displays the usage of Power over Ethernet (PoE) power. |
Was This Article Helpful?
Help us to improve our support portal