• Switch 1.3.0
• Product Overview
  • Package Contents
  • Technical Specifications
  • Supported SonicWall and third-party SFP and SFP+ Modules
  • Physical Interface - 8 Port Switch
  • Physical Interface - 10 Port Switch
  • Physical Interface - 24 Port Switch
  • Physical Interface - 48 Port Switch
  • Device Management
  • Connecting the Switch to a Network
  • Capacity Matrix
• System Management
  • System
    • Dashboard
    • Network
    • Administration
      • SSH Settings
    • System Information
    • User Management
    • Simple Network Management Protocol
      • Classic diagram of SonicWall Switch for SNMP Testing
      • Add View List
      • Add Target Params
      • Add Target Address
      • Add Notify Setting
      • SNMP Traps/Informs
      • How to configure SNMP on SonicWall Switch
      • SNMP supported OID’s in 1.2.0.1-2s
      • How to Configure SNMP/MIB Browser on Client PC
    • Address Resolution Protocol
      • ARP Table
      • ARP Statistics
    • Authentication
    • Firmware and Settings
    • DHCP Snooping
    • DHCP Relay
    • Time
  • Switching
    • Port Settings
      • Port Settings
        • Native VLAN
      • QoS Settings
        • Bandwidth Control
        • Storm Control
      • PoE
      • Security
        • 802.1X
      • ACL Binding
      • Advanced
    • Spanning Tree Protocol
      • Network Loops
      • Global Settings
      • MST Instance Settings
      • STP Port Statistics
    • Loopback Detection
    • Link Aggregation
      • Port Trunking
      • Link Aggregation Control Protocol Settings
      • Link Aggregation Control Protocol Timeout
      • Trunk Port Settings
    • Port Mirror
    • Jumbo Frames
    • MAC Address Table
      • Dynamic MAC Address
      • Search MAC Address
      • MAC Aging Time
    • Link Layer Discovery Protocol
      • Local Device
      • Remote Device
    • IGMP Snooping
      • Global Settings
      • Group List
      • Router Settings
    • Multicast Filtering
    • Quality of Service
      • Class of Service Mapping
      • IP/DSCP Mapping
      • Advanced Mode
        • Class Mapping
          • Adding a Class Policy
        • Policy Mapping
    • Remote Network Monitoring
      • Stat List
      • Event List
      • Event Log Table
      • Statistics
      • Alarm List
      • History List
      • History Log Table
    • Port Statistics
  • Routing
  • Security
    • 802.1X Security
      • MAC Authentication Bypass
        • Behaviors and Restrictions
      • Global Settings
      • Port Settings
      • Authenticated Host
      • Statistics
    • Denial of Service
    • ACL Management
      • MAC ACL
      • MAC-Based ACE
      • IPv4 ACL
      • IPv4-Based ACE
  • VLAN
    • 802.1Q
      • Configuring IGMP Snooping Settings
      • Configuring DHCP Snooping Status
      • Configuring Access and Trunks using Standalone access
    • Voice VLAN
      • OUI Settings
      • Port Settings
  • Logging
    • Global Settings
      • Local Settings
    • Remote Logging
    • Log Table
  • Diagnostics
    • Ping
    • Trace Route
    • Cable Diagnostics
    • Tech Support Report
• System Maintenance
• Switch Troubleshooting
  • Communication flow between Firewall and Switch before it gets authenticated
• SonicWall Support
  • About This Document

System Maintenance

The maintenance bar provides maintenance functions, including upgrading firmware, resetting the configuration to factory default standards, rebooting the device, resetting cloud management, and logging out of the interface.

The following represents the Maintenance Menu bar:

Upgrading

Firmware can be upgraded using two methods

• Upload
• SonicWall Cloud Server

Follow this procedure to upgrade the Firmware using Upload File method

1. Click to start the upgrade process.
2. In the Upgrade Method drop-down, select Upload File option.
3. Click Browse to the select the location of the new firmware file.
4. Select the new firmware file and click Open.
5. In the Partition drop-down, select the required partition for the upgrade process.
6. Click Apply and follow the on-screen instructions to complete the Firmware Upgrade.

   

A prompt displays to confirm the Firmware Upgrade.

The Upgrade process may require a few minutes to complete.

Follow this procedure to upgrade the Firmware using SonicWall Cloud Server method

1. Click to start the upgrade process.
2. In the Upgrade Method drop-down, select SonicWall Cloud server option.
3. In the Available Firmwares drop-down, select the required firmware to upgrade.
4. Click to fetch the latest firmwares from SonicWall Cloud server.
5. In the Partition drop-down, select the required partition for the upgrade process.
6. Click Apply and follow the on-screen instructions to complete the Firmware Upgrade.

A prompt displays to confirm the Firmware Upgrade.

The Upgrade process may require a few minutes to complete.

Resetting

The Reset function will delete all configuration information from the current device.

Follow this procedure to reset the Switch back to factory default settings

1. Click to start the reset process.

2. When a prompt displays, click Confirm to confirm the reset or Cancel to quit the procedure.

Rebooting

Follow this procedure to reboot the Switch

1. Click to start the reboot process.

2. When a prompt displays, click Apply to confirm the reboot process or Cancel to quit the procedure.

Cloud Management

Follow this procedure to disable or enable cloud management

1. Click icon in the Maintenance menu bar.
2. When a prompt displays, click Apply to disable cloud management.

   If cloud management has already been disabled, the prompt will ask to enable cloud management.

   

Logging Out

Follow this procedure to log out the current profile from the user interface

1. Click icon in the Maintenance menu bar.

2. When a prompt displays, click OK to confirm the logout or Cancel to quit the logout.

   

You are logged out from the Switch application.