Switch Administration Guide

Download PDF
Technical Documentation > Switch Administration Guide > System Management > Security > 802.1X Security > Port Settings

Port Settings

This port settings displays similar settings to view and configure Switch port settings along with Auth mode, MAB Mode and Max Host.

Port

Displays the ports for which the 802.1X information is displayed
Mode Select the Auto or Force UnAuthorized or Force Authorized mode from the list.
AuthMode Select the Port-Based or MAC-Based from the list.
Reauthentication Displays whether port reauthentication is Enabled or Disabled.
Reauthentication Period Displays the time span in which the selected port is reauthenticated.
Quiet Period Enter the number of the device that remains in the quiet state following a failed authentication exchange. The default is 60 seconds.
Supplicant Period Enter the amount of time that lapses before an EAP request is resent to the supplicant. The default is 30 seconds.
Max Retry Enter the maximum number of times that the switch retransmits an EAP request to the client before it times out the authentication session. The default is 2 times
Guest VLAN Select whether Guest VLAN is Enabled or Disabled on the Switch. The default is Disabled.
RADIUS VLAN Assign Displays the status of RADIUS VLAN Assignment.
MAB Mode

Select the MAB-mode, Hybrid-mode, or Disable from the list.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden