Switch Administration Guide
- Switch 1.3.0
- Product Overview
- Package Contents
- Technical Specifications
- Supported SonicWall and third-party SFP and SFP+ Modules
- Physical Interface - 8 Port Switch
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Device Management
- Connecting the Switch to a Network
- Capacity Matrix
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
QoS Settings
Configure the QoS port settings for the Switch by selecting a port and choosing a CoS value from the drop-down box. Next, Select to Enable or Disable the Trust setting to let any CoS packet be marked at ingress.
CoS (Class of Service) Value |
Select the CoS priority tag values, where 0 is the lowest and 7 is the highest. |
Trust |
Select Enable to trust any CoS packet marking at ingress and select Disable to not trust any CoS packet marking at ingress. |
Click Apply to save the changes to the system.
Was This Article Helpful?
Help us to improve our support portal