• Switch 1.2
• Product Overview
  • Technical Specifications
  • Supported SonicWall and 3rd party SFP and SFP+ Modules that can be used with SonicWall Switches
  • Physical Interface - 10 Port Switch
  • Physical Interface - 24 Port Switch
  • Physical Interface - 48 Port Switch
  • Physical Interface - 8 Port Switch
  • Management Interface
  • Connecting the Switch to a Network
  • Web Access
• System Management
  • System
    • Dashboard
    • Network
    • Administration
      • SSH Settings
    • System Information
    • User Management
    • Simple Network Management Protocol
      • Classic diagram of SonicWall Switch for SNMP Testing
      • Add View List
      • Add Target Params
      • Add Target Address
      • Add Notify Setting
      • SNMP Traps/Informs
      • How to configure SNMP on SonicWall Switch
      • SNMP supported OID’s in 1.2.0.1-2s
      • How to Configure SNMP/MIB Browser on Client PC
    • Address Resolution Protocol
      • ARP Table
      • ARP Statistics
    • Authentication
    • Firmware and Settings
    • DHCP Snooping
    • DHCP Relay
    • Time
  • Switching
    • Port Settings
      • Port Settings
        • Native VLAN
      • QoS Settings
        • Bandwidth Control
        • Storm Control
      • PoE
      • Security
        • 802.1X
      • ACL Binding
      • Advanced
    • Spanning Tree Protocol
      • Network Loops
      • Global Settings
      • MST Instance Settings
      • STP Port Statistics
    • Loopback Detection
    • Link Aggregation
      • Port Trunking
      • Link Aggregation Control Protocol Settings
      • Link Aggregation Control Protocol Timeout
    • Port Mirror
    • Jumbo Frames
    • MAC Address Table
      • Dynamic MAC Address
    • Link Layer Discovery Protocol
      • Local Device
      • Remote Device
    • IGMP Snooping
      • Global Settings
      • Group List
      • Router Settings
    • Multicast Filtering
    • Quality of Service
      • Class of Service Mapping
      • IP/DSCP Mapping
      • Class Mapping
        • Adding a Class Policy
      • Policy Mapping
    • Remote Network Monitoring
      • Stat List
      • Event List
      • Event Log Table
      • Statistics
      • Alarm List
      • History List
      • History Log Table
    • Port Statistics
  • Routing
  • Security
    • 802.1X Security
      • Mac Authentication Bypass
        • Behaviors and Restrictions
      • Global Settings
      • Port Settings
      • Authenticated Host
      • Port Statistics
    • Denial of Service
    • ACL Management
      • MAC ACL
      • MAC-Based ACE
      • IPv4 ACL
      • IPv4-Based ACE
  • VLAN
    • 802.1Q
    • Voice VLAN
      • OUI Settings
      • Port Settings
  • Logging
    • Global Settings
      • Local Settings
    • Remote Logging
    • Log Table
  • Diagnostics
    • Ping
    • Trace Route
    • Download required tech support files
• System Maintenance
• Switch Troubleshooting
  • Communication flow between Firewall and Switch before it get authenticated
• SonicWall Support
  • About This Document

ARP Table

The Switch maintains an ARP table which is made of mapped IP addresses and MAC addresses.

To add an entry in the ARP Table

1. Click Add ARP above the table.

   The Add ARP screen appears.

2. In the Address field, enter the IP address of the host to which the MAC address is to be configured.
3. In the MAC Address field, enter the MAC address of the host in the MAC address field.
4. In the Interface drop-down, select the required VLAN interface.
5. Click Apply to save the changes.

To delete an entry from the ARP Table

1. Click Configure on the entry which you to delete.

   A Confirmation dialog appears.

2. Click Confirm to delete the entry from the ARP table.