Switch Administration Guide
- Switch 1.3.0
- Product Overview
- Package Contents
- Technical Specifications
- Supported SonicWall and third-party SFP and SFP+ Modules
- Physical Interface - 8 Port Switch
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Device Management
- Connecting the Switch to a Network
- Capacity Matrix
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
Remote Logging
Remote logging enables the Switch to send system logs to the Log Server. The Log Server helps to centralize system logs from various devices such as Access Points so that the administrator can monitor and manage the whole network. Click the Add button and select the severity level of events you wish to log.
|
IP/Hostname |
Specify the IP address of the host configured for syslog. |
|
Server Port |
Specify the port on the host to which syslog messages are sent. |
|
Remote Log Severity |
Refer to severity level table Logging section. Logs with the selected severity level and all logs of greater severity are sent to the host. For example, if Error is selected, the logged messages include Error, Critical, Alert, and Emergency |
|
Log Facility |
The log facility is used to separate out log messages by application or by function, allowing you to send logs to different files in the syslog server. Use the drop-down menu to select local0, local1, local2, local3, local4, local5, local6, or local7. |
Click Apply to accept the changes or Cancel to discard them.
Was This Article Helpful?
Help us to improve our support portal