Local Settings

The Switch supports log output to two locations, Flash and RAM. The information stored in the system’s RAM log will be lost after the Switch is rebooted or powered off, whereas the information stored in the System Flash will be retained even if the Switch is rebooted or powered off.

Logs with the selected severity level and all logs of greater severity are sent to the host. For example, if Error is selected for the logging level, the logged messages include Error, Critical, Alert, and Emergency.

RAM	Log stored in RAM. Will only be erased after system reset.
Flash	Log erased after reboot or power off

Refer to Logging for severity level details.

EMERGENCY	If the Switch is not functioning properly, an emergency log message is saved to the specified logging location.
ALERT	If there is a serious Switch malfunction, then all Switch features are down.
CRITICAL	A critical log is saved if a critical Switch malfunction occurs.
ERROR	If triggered, a device error has occurred.
WARNING	The device is functioning, but an operational problem has occurred.
NOTICE	This will provide information about the Switch.
INFO	This will provide information about the Switch.
DEBUG	This will provide a debugging message.

Click Apply to accept the changes.