Switch Administration Guide

Technical Documentation>  System Management>  Switching>  Quality of Service>  Advanced Mode>  Class Mapping>  Adding a Class Policy
Table of Contents

Adding a Class Policy

Under Class Mapping, the details of class policies can be added or configured. Click Add to add a new class policy.

Name Enter the name for the class policy. Using up to 23 alphanumeric characters.
Source MAC Address

Select the Source MAC Address from the drop-down.

  • Selecting User Defined option allows the definition of a Source MAC Address. In the Source MAC Value field, enter the required value.
Destination MAC Address

Select the Destination MAC Address from the drop-down.

  • Selecting User Defined option allows the definition of a Destination MAC Address. In the Destination MAC Value field, enter the required value.
Source IP Address

Select the Source IP Address from the drop-down.

  • Selecting User Defined option allows the definition of a Source IP Address. In the Source IP Mask field, enter the required value.

The same IP address can be used for both the source and destination in the configuration.
Destination IP Address

Select the Destination IP Address from the drop-down.

  • Selecting User Defined option allows the definition of a Destination IP Address. In the Destination IP Mask field, enter the required value.
Ethertype Value (Hex) Enter the Ethertype value. The range is from 0600-FFFF.
VLAN ID Enter the VLAN ID range from the configured VLANs to associate with the Class Policy. The VLAN ID number range is from 1 to 4094.
VLAN Priority

Select the VLAN Priority from the drop-down.

  • Selecting 802.1p to match option allows the definition of a VLAN Priority. The VLAN ID Priority range is from 0 to 7.
Protocol

Select Any or Select from a List in the drop down menu.

Based on the protocol selection, the fields for the protocol appears.
Type of Service

Select the Type of Service from the drop-down

  • Selecting DSCP to match option allows the definition of the DSCP value. The range is from 0-63.
Action

Select the Type of Action from the drop-down.

  • Selecting 802.1p to match option allows the definition of the VLAN Priority. The VLAN ID Priority range is from 0 to 7.
  • Selecting DSCP to match option allows the definition of the DSCP value. The range is from 0-63.

Click Apply to save the changes to the system.

Editing a Class Policy

To edit a class policy

  1. In the Class Mapping table, hover on desired class policy and click Edit icon.
  2. Make the necessary changes and click Apply to save the settings.

Deleting a Class Policy

To delete a class policy

  1. In the Class Mapping table, hover on desired class policy and click Delete icon.

    A confirmation dialog appears.

  2. Click Confirm to delete a class policy.

    The class policy is removed from the Class Mapping table.