Port Settings

This port settings displays similar settings to view and configure Switch port settings along with Auth mode, MAB Mode and Max Host.

Port	Displays the ports for which the 802.1X information is displayed
Mode	Select the Auto or Force UnAuthorized or Force Authorized mode from the list.
AuthMode	Select the Port-Based or MAC-Based from the list.
Reauthentication	Displays whether port reauthentication is Enabled or Disabled.
Reauthentication Period	Displays the time span in which the selected port is reauthenticated.
Quiet Period	Enter the number of the device that remains in the quiet state following a failed authentication exchange. The default is 60 seconds.
Supplicant Period	Enter the amount of time that lapses before an EAP request is resent to the supplicant. The default is 30 seconds.
Max Retry	Enter the maximum number of times that the switch retransmits an EAP request to the client before it times out the authentication session. The default is 2 times
Guest VLAN	Select whether Guest VLAN is Enabled or Disabled on the Switch. The default is Disabled.
RADIUS VLAN Assign	Displays the status of RADIUS VLAN Assignment.
MAB Mode	Select the MAB-mode, Hybrid-mode, or Disable from the list.
Max Host	Displays the maximum number of hosts when using mac-based mode.