Switch Administration Guide

Technical Documentation>  Product Overview>  Physical Interface - 48 Port Switch
Table of Contents

Physical Interface - 48 Port Switch

  1. RJ45 Console Port
  2. Power LED: Light Off = Power Off; Solid Light = Power On.
  3. Fault LED: Light Off = Normal Behavior; Solid Light = Error.

    Options 4 through 7 are available only on the POE model.

  4. PoE Max LED: Light Off = Power Available; Solid Light = Power Exceeded.
  5. LAN LED: Light Off = Not activated; Solid Light = Activated.
  6. PoE LED: Light Off = Not activated; Solid Light = Activated.
  7. LED Selector: Press to change between LAN and PoE LED monitoring.
  8. Reset Button: Press to reset the device to factory default settings.
  9. RJ45 LAN Ports: 10/100/1000 Mbps or 1 Gbps.

  10. LAN Mode LED (Per RJ45 Port): Light Off = No Link; Solid Amber Light = 100 Mbps Link Active.

  11. Link/Act LED (Per RJ45 Port): Light Off = No Link; Solid Light = Link Active; Blinking Light = Actively Transmitting / Receiving.

  12. Speed LED (Per SFP Port). Solid Amber Light indicates 10 Gbps Link, Solid Green Light indicates 1 Gbps link.

  13. Link/Act LED (Per SFP Port).

  14. SFP Ports: Small Form-factor Pluggable ports: 1 or 10 Gbps ports.

  15. Power Connector.