Switch Administration Guide

Technical Documentation>  System Management>  Security>  ACL Management>  MAC-Based ACE
Table of Contents

MAC-Based ACE

Allows MAC-Based Access Control Entry (ACE) to be defined within a configured ACL.

ACL Name

Select the ACL from the list.

Sequence

Enter the sequence number which signifies the order of the specified ACL relative to other ACLs assigned to the selected interface. The valid range is from 1-2147483646, 1 being processed first.

Action

Select what action taken if a packet matches the criteria.

  • Permit – Forward packets that meet the ACL criteria.
  • Deny– Drops packets that meet the ACL criteria.

Destination MAC Value

Enter the destination MAC address.

Source MAC Value

Enter the source MAC address.

VLAN ID

Enter the VLAN ID to which the MAC address is attached in MAC ACE.

The range is from 1-4094.

802.1p Value

Enter the 802.1p value. The range is from 0-7.

Ethertype Value

Enter the Ethertype value. The range is from 0600-FFFF.