Switch Administration Guide

Technical Documentation>  System Management>  Security>  802.1X Security>  Global Settings
Table of Contents

Global Settings

Within Global Settings, select whether to Enable or Disable 802.1x for the Switch. If enabled, next choose whether to Enable or Disable the Guest VLAN for the Switch. Finally, select the VLAN ID from the list.

State

Select whether authentication is Enabled or Disabled on the Switch.

Guest VLAN

Select whether Guest VLAN is Enabled or Disabled on the Switch. The default is Disabled.

Guest VLAN ID

Select the guest VLAN ID from the list of currently defined VLANs.

Click Apply to save the changes to the system.