SNMP Traps/Informs

To send SNMP Traps/Informs

1. Navigate to System > SNMP > Users

   

2. Add User with Privilege Mode is No Auth（such as public

   

3. Navigate to System > SNMP > Community List

   

4. Add Community List which the security name is the username in Users

   

5. Navigate to System > SNMP > Target Params

   

6. Add Target Params and select the parameters as needed

   

7. Navigate to System > SNMP > Target Address

   

8. Add Target Address and fill out the parameters as needed

   

9. Navigate to System > SNMP > Notify Settings

   

10. Add Notify Settings and fill out the parameters as needed

    

11. Using iReasoning MIB Browser to confirm the SNMP Trap Function

12. Download iReasoning MIB Browser, then Navigate to Tools >Trap Receiver

    

13. Click Tools >Options

    

14. Make sure the Trap Port is same as the TARGET ADDRESS

    

    

15. Trigger some SNMP Traps（such as link up or link down）