Switch Administration Guide

Technical Documentation>  System Management>  System>  Simple Network Management Protocol (SNMP)>  Add Target Address
Table of Contents

Add Target Address

On Target Address option, the maximum entries of Target Address is 10.

Click on Add Target Address.

Target Address Name Custom string with 1-32 characters
IP Address String in IP format.
UDP Port Number in 1-65535

Timeout

Number in 1-1500
Retry

Number in 1-3

Tag Identifier

 Custom string with 1-20 characters.

Target Parameter

  • Selection

  • Options should be Target Parameter Names in Target Params list table.

Click Apply to accept the changes or Cancel to discard them.