Add View List

• View name

  • The View Name should be all views in READ VIEW, WRITE VIEW, and, NOTIFY VIEW in Access list table.

    

  • Click on Add View

    

  • Subtree OID

    • Number in 1-20

  • Subtree mask level

    Subtree mask level in SNMP (Simple Network Management Protocol) refers to a technique used to simplify the management of a large number of related objects in an SNMP MIB (Management Information Base).

    A subtree mask is a bit pattern that is used to match a group of related objects in a MIB. The subtree mask level specifies the depth of the tree at which the subtree mask is applied. This means that only the objects within the specified subtree will be affected by the mask. For example, if the subtree mask level is set to 2, then the mask will only affect objects within the second level of the MIB tree. This allows administrators to apply the same configuration or settings to a group of related objects without affecting other objects in the MIB.

    • String with 1-20 characters.

      mask level should not exceed OID level.

  • View type

    • Selection

      • Included

      • Excluded