Link Aggregation Control Protocol Settings

Assign a system priority to run with Link Aggregation Control Protocol (LACP) and it becomes for a backup link if a link goes down. The lowest system priority is allowed to make decisions about which ports it is actively participating in, in case a link goes down. If two or more ports have the same LACP port priority, the port with the lowest physical port number will be selected as the backup port. If a LAG already exists with the maximum number of allowed port members, and LACP is subsequently enabled on another port using a higher priority than an existing member, the newly configured port will replace the existing port member that has a lower priority. A smaller number indicates a higher priority level. The range is from 0-65535 and default is: 32768.

System Priority	Enter the LACP priority value to the system. The default is 32768 and the range is from 1-65535.
System Policy	Enter the LACP load distribution algorithm. The default is src-dest-mac.

Click Apply to update the system settings.