Switch Administration Guide
- Switch 1.2
- Product Overview
- Technical Specifications
- Supported SonicWall and 3rd party SFP and SFP+ Modules that can be used with SonicWall Switches
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Physical Interface - 8 Port Switch
- Management Interface
- Connecting the Switch to a Network
- Web Access
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
DHCP Snooping
DHCP snooping is a layer 2 security technology built into the operating system of a capable network switch that drops DHCP traffic determined to be unacceptable. The fundamental use case for DHCP snooping is to prevent unauthorized (rogue) DHCP servers offering IP addresses to DHCP clients.
|
DHCP Snooping Status |
Enable or Disable DHCP Snooping |
|
MAC Verify |
Enable this setting If the device receives a packet on an untrusted interface and the source MAC address and the DHCP client hardware address do not match, address verification causes the device to drop the packet |
|
Binding List |
This list shows the current statistics of vlan id, ports, mac address and the respective IP Address |
Was This Article Helpful?
Help us to improve our support portal