Switch Administration Guide
- Switch 1.2
- Product Overview
- Technical Specifications
- Supported SonicWall and 3rd party SFP and SFP+ Modules that can be used with SonicWall Switches
- Physical Interface - 10 Port Switch
- Physical Interface - 24 Port Switch
- Physical Interface - 48 Port Switch
- Physical Interface - 8 Port Switch
- Management Interface
- Connecting the Switch to a Network
- Web Access
- System Management
- System
- Switching
- Routing
- Security
- VLAN
- Logging
- Diagnostics
- System Maintenance
- Switch Troubleshooting
- SonicWall Support
Firmware and Settings
The Switch maintains two versions of the Switch image in its permanent storage. One image is the active image, and the second image is the backup image. The Dual Image screen enables the user to select which partition will be set as active after the next reset. The Switch boots and runs from the active image. If the active image is corrupt, the system automatically boots from the non- active image.
|
Upgrade Method |
You can upgrade the Switch Firmware using the following methods:
|
|
Available Firmware |
Select the available firmware in the Switch for upgrade process. |
|
Partition |
SonicWall Switch supports two partition with one of them being ACTIVE at a time. |
|
Current Active Partition |
This displays the partition which is currently ACTIVE. |
|
Change Active Partition |
This option is used to change the active parition to the other one. Switch reboots post this action. |
| Settings |
You can export and import the Switch Firmware configuration file using the following methods:
|
Click Apply to save the changes on this page.
Was This Article Helpful?
Help us to improve our support portal