Setup Gateway

This screen allows you to add the topology type you selected in the previous screen.

Add Hub

1. Select devices that are part of a group from the Choose devices drop-down menu. You can also search for the devices or groups in the list by typing the name in the input field.

   You can only select the devices that are part of a group.

   

2. After selecting a device, fill the following options.

   WAN Interface	Select a WAN Interface.
   Primary WAN IP	Enter the primary gateway in the field.
   Secondary WAN IP	Enter the secondary gateway in the field.
   Local IKE ID Criteria	Choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address. Is there any recommended one?
   IKE ID	This field is auto-populated and cannot be edited.
   Protected Network/Local Network	Select a network which will participate in VPN connection from hub side. Select an Address Object or Address Group from the drop-down menu. If the list is empty, you can add a new address object and group. Click the Edit icon to add or edit Address Object and Group.
   Source Address	This option is available when Point to Point Topology is selected. Select an Address Object or Address Group from the drop-down menu. If the list is empty, you can add a new address object and group. Click the Edit icon to add or edit Address Object and Group. For more information, refer to Adding Address Objects or Adding Address Groups.

3. a

4.  

Add Spoke

Review with QA

1. From the Choose devices drop down, select groups or devices by checking the box. You can also search for the devices or groups in the list by typing the name in the input field. Click Apply to select the device. The devices that are selected are displayed in a list.
   Hub and Spokes should not have overlapping IP Addresses in any of the fields.

   

2. To use the common configuration, click Common Configuration icon.
   After selecting the common configuration, you are required to choose the following options :
   1. Reference Device - From the drop down list, select the reference device.
   2. WAN Interface - Choose WAN interface from the list. The options get enabled only after selecting Reference device.
   3. Local IKE ID Criteria - Click the radio button to choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address.
   4. IKE ID - This field is auto-populated and cannot be edited.
   5. Local Network - Enter the local network IPV4 address.
   6. Check the box to enable or disable auto-increment local network.
3. To edit the configuration of the device, go to the Action column and select Edit icon.