Adding Device 1 and Device 2

To add Device 1 and Device 2

1. Select a device that is part of a group from the Choose devices drop-down menu. You can also search for the device or group in the list by typing the name in the input field.

   You can only select a device that is part of a group.

   

2. Enter the Device 1 details.

   WAN Interface	Select a WAN Interface.
   Primary WAN IP	Enter the primary gateway in the field.
   Secondary WAN IP	Enter the secondary gateway in the field.
   Local IKE ID Criteria	Choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address.
   IKE ID	This field is auto-populated if Firewall ID is selected as Local IKE ID Criteria and cannot be edited. Enter the IKE ID if any other option is selected.
   Protected Network/Local Network	Select a network which will participate in VPN connection from hub side. Select an Address Object or Address Group from the drop-down menu. If the list is empty, you can add a new address object and group. Click the Edit icon to add or edit Address Object and Group.
   Source Address	Select an Address Object or Address Group from the drop-down menu. If the list is empty, you can add a new address object and group. Click the Edit icon to add or edit Address Object and Group. For more information, refer to Adding Address Objects or Adding Address Groups.

3. Click the caret icon next to the Device 2 details.

4. Select devices that are part of a group from the Choose devices drop-down menu and click Apply. You can also search for the devices or groups in the list by typing the name in the input field. The devices that are selected are displayed in a list.

   You can only select the devices that are part of a group.

   Device 1 and Device 2 should not have overlapping IP Addresses in any of the fields.

   

5. Select the Configuration Type to be used.

   Common Configuration	Select this option to apply a common configuration to multiple devices.
   Per Device	Select this option to apply a configuration to a specific device.

6. Click the Edit icon in the ACTION column of the selected device if Per Device configuration is selected.

7. Enter the configuration details.

   WAN Interface	Select a WAN Interface.
   Local IKE ID Criteria	Choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address.
   IKE ID	This field is auto-populated if Firewall ID is selected as Local IKE ID Criteria and cannot be edited. Enter the IKE ID if any other option is selected.
   Local Network	Enter the local network IPV4 address.
   Source Address	Select an Address Object or Address Group from the drop-down menu. If the list is empty, you can add a new address object and group. Click the Edit icon to add or edit Address Object and Group. For more information, refer to Adding Address Objects or Adding Address Groups.

8. Click Accept For All for Common Configuration.
9. Click Save for Per Device.