Adding a VPN Topology

To add a VPN Topology

1. Navigate to Manager View | Home > VPN Topology > IPSec VPN Topology > Topologies page.
2. Click the Add icon.

3. Fill Basic Details of the VPN Topology according to Basic Information.

   

4. Click Next and select a security association from the drop-down menu.

   Security associations are shown in the drop-down menu if any existing security associations are available. If the list is empty, add security associations according to Adding a Security Association.

   

5. Click Next and Setup Gateway.

   Setup Gateway depends on the Topology type selected in step 3.

   Topology Type	Gateway Setup
   Hub and Spoke	Add Hub and Spoke according to Adding a Hub and Spoke.
   Full Mesh	Add Devices according to Adding Devices.
   Partial Mesh	This option is disabled now.
   Point to Point	Add Device 1 and Device 2 according to Adding Device 1 and Device 2.

6. Click Next to view summary of the selected devices. Review the added details and resolve if any errors before adding a topology.
7. Click Done.