Adding Devices

To add devices

1. Select devices that are part of a group from the Choose devices drop-down menu. You can also search for the devices or groups in the list by typing the name in the input field.

   You can only select the devices that are part of a group.

2. Select the Configuration Type to be used.

   Common Configuration	Select this option to apply a common configuration to all selected devices.
   Per Device	Select this option to apply a configuration to a specific device.

3. Click the Edit icon in the ACTION column of the selected device if Per Device configuration is selected.

   

4. Enter the configuration details.

   WAN Interface	Select a WAN Interface.
   Primary WAN IP	Enter the primary gateway in the field. You can add an existing variable object or create a new one in common configuration. Click the Variable icon to select an existing variable object or create a new one.
   Secondary WAN IP	Enter the secondary gateway in the field. You can add an existing variable object or create a new one in common configuration. Click the Variable icon to select an existing variable object or create a new one.
   Local IKE ID Criteria	Choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address.
   IKE ID	This field is auto-populated if Firewall ID is selected as Local IKE ID Criteria and cannot be edited. Enter the IKE ID if any other option is selected.
   Protected Network/Local Network	Select a network which will participate in VPN connection from hub side. Select an Address Object or Address Group from the drop-down menu. If the list is empty, you can add a new address object and group. Click the Edit icon to add or edit Address Object and Group.

5. Click Accept For All for Common Configuration.
6. Click Save for Per Device.