• SonicOS 7 Access Points
• Settings
  • Synchronize Access Points
  • Provisioning Overview
  • Creating/Modifying Provisioning Profiles
    • Adding/Editing a Provisioning Profile - Getting Started
    • General Settings for Provisioning Profiles
    • 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
      • Radio Settings
      • Wireless Security
      • Protected Management Frames (PMF Option)
      • About Local Radius Servers and EAP Authentication Balancing
      • Configuring Radius Server Settings
      • ACL Enforcement
      • Remote MAC Address Access Control Settings
    • 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
      • Configuring the RSSI Treshold
      • Configuring IEEE802.11r Settings for Secure Fast Roaming
      • Configuring IEEE802.11k Settings for Dynamic Radio Management
      • Configuring IEEE802.11v Settings for Dynamic Environment Management
    • Sensor Settings for WIDP in Provisioning Profiles
    • Mesh Network Settings for Provisioning Profiles
      • Setting Up a Mesh Network
      • Enabling a Multi-hop Mesh Network
      • Active/Active Clustering Full Mesh
    • 3G/4G/LTE WWAN Settings for Provisioning Profiles
      • Manually Configuring the 3G/4G/LTE WWAN Profile
      • Using the 3G/4G/LTE WWAN Wizard
      • Configuring Load Balancing among Multiple USB Modems
    • Bluetooth LE Settings for Provisioning Profiles
    • Deleting Access Point Profiles
    • Product Specific Configuration Notes
  • Managing Access Points
    • Deleting Access Point Objects
    • Rebooting Access Point Objects
    • Modifying Access Point Objects
• Firmware Management
  • About Firmware Management
  • Obtaining the Latest SonicWall Firmware
  • Downloading Firmware from a Specific URL
  • Uploading Firmware to an Access Point
• Floor Plan View
  • Managing the Floor Plans
    • Selecting a Floor Plan
    • Creating a Floor Plan
    • Editing a Floor Plan
    • Set Measuring Scale
  • Managing Access Points
    • Available Devices
    • Added Access Points
    • Removing Access Points
    • Export Image
    • Context Menu
• Station Status
• Intrusion Detection Services
  • Scanning Access Points
  • Authorizing Access Points
• Advanced IDP
  • Enabling Wireless IDP on a Profile
  • Configuring Wireless IDP Settings
  • Viewing KRACK Sniffer Packets
• Packet Capture
• Virtual Access Points
  • Before Configuring VAPs
    • Determining Your VAP Needs
    • Determining Security Configurations
    • Sample Network Definitions
    • Prerequisites
    • VAP Configuration Worksheet
  • Access Point VAP Configuration Task List
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
    • ACL Enforcement
    • Remote MAC Address Access Control Settings
  • Virtual Access Points
    • General Tab
    • Advanced Tab
  • Virtual Access Point Groups
• RF Monitoring
  • Prerequisites
  • RF Monitoring Summary
  • 802.11 General Frame Setting
  • 802.11 Management Frame Setting
  • 802.11 Data Frame Setting
  • Discovered RF Threat Stations
  • Adding a Threat Station to the Watch List
  • Practical RF Monitoring Field Applications
    • Using Sensor ID to Determine RF Threat Location
    • Using RSSI to Determine RF Threat Proximity
• RF Analysis
  • Using RF Analysis on SonicWall Access Points
    • Understanding the RF Score
    • Channel Utilization Graphs and Information
    • Viewing Overloaded Channels
    • RFA Highly Interfered Channels
• RF Spectrum
• FairNet
  • Supported Platforms
  • FairNet Features
  • Management Interface Overview
  • Configuring FairNet
• Wi-Fi Multimedia
  • WMM Access Categories
  • Assigning Traffic to Access Categories
  • Configuring Wi-Fi Multimedia Parameters
    • Configuring WMM
    • Creating a WMM Profile for an Access Point
• 3G/4G/LTE WWAN
• Bluetooth LE Devices
  • Viewing BLE Scanned Data
• Radio Resource Management
  • Configuring Radio Resource Management
  • Configuring Dynamic Channel Selection
• SonicWall Support
  • About This Document

Viewing Overloaded Channels

RF Analysis gives a warning when it detects more than four active access points in the same channel. No matter how strong its signal strength is, RF Analysis marks the channel as overloaded.

Overloaded Channels

Information about each discovered access point includes: SSID, MAC, signal strength, and channel. Two values are shown for signal strength: dBm and percentage value.