SonicOS 7 Access Points
- SonicOS 7 Access Points
- Settings
- Synchronize Access Points
- Provisioning Overview
- Creating/Modifying Provisioning Profiles
- Adding/Editing a Provisioning Profile - Getting Started
- General Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
- Sensor Settings for WIDP in Provisioning Profiles
- Mesh Network Settings for Provisioning Profiles
- 3G/4G/LTE WWAN Settings for Provisioning Profiles
- Bluetooth LE Settings for Provisioning Profiles
- Deleting Access Point Profiles
- Product Specific Configuration Notes
- Managing Access Points
- Firmware Management
- Floor Plan View
- Station Status
- Intrusion Detection Services
- Advanced IDP
- Packet Capture
- Virtual Access Points
- RF Monitoring
- RF Analysis
- RF Spectrum
- FairNet
- Wi-Fi Multimedia
- 3G/4G/LTE WWAN
- Bluetooth LE Devices
- Radio Resource Management
- SonicWall Support
Managing Access Points
The SonicPoint / SonicWave Objects section displays the settings for connected access points, and provides icons to edit them or perform other actions.
The table displays the configured values for the access points, including:
Column | Description |
---|---|
# | Row reference number |
Name | Name of access point |
Interface | Firewall interface number and zone to which the access point is connected |
Network Settings | Access point IP address, MAC address, and management designation |
Status | Operational, Non-responsive, or other access point states |
5GHz Radio | Access point SSID (MSSID) name for this radio, frequency and 802.11 protocols |
5GHz Radio Channel | Band setting, channels, and state of radio such as enabled and active |
2.4GHz Radio | Access point SSID (MSSID) name for this radio, frequency and 802.11 protocols |
2.4GHz Radio Channel | Band setting, channels, and state of radio such as enabled and active |
3G/4G/LTE | Enabled/disabled state of 3G, 4G, or LTE and binding information |
Enable | Selected if the access point is enabled |
SSH | Button for SSH access to the access point |
Was This Article Helpful?
Help us to improve our support portal