SonicOS 7 Access Points
- SonicOS 7 Access Points
- Settings
- Synchronize Access Points
- Provisioning Overview
- Creating/Modifying Provisioning Profiles
- Adding/Editing a Provisioning Profile - Getting Started
- General Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
- Sensor Settings for WIDP in Provisioning Profiles
- Mesh Network Settings for Provisioning Profiles
- 3G/4G/LTE WWAN Settings for Provisioning Profiles
- Bluetooth LE Settings for Provisioning Profiles
- Deleting Access Point Profiles
- Product Specific Configuration Notes
- Managing Access Points
- Firmware Management
- Floor Plan View
- Station Status
- Intrusion Detection Services
- Advanced IDP
- Packet Capture
- Virtual Access Points
- RF Monitoring
- RF Analysis
- RF Spectrum
- FairNet
- Wi-Fi Multimedia
- 3G/4G/LTE WWAN
- Bluetooth LE Devices
- Radio Resource Management
- SonicWall Support
3G/4G/LTE WWAN Settings for Provisioning Profiles
If you are not configuring a USB modem, you can skip this section.
This features provides another wireless WAN solution for firewall appliances that use wireless access points like SonicWave devices. You can plug a USB modem device into the SonicWave and it does the dial-up operation and connects to the Internet. After connected, the SonicWave acts as a WWAN device for the firewall and provides WAN access.
When configuring the modem for the first time, you can use the wizard to take advantage of the auto-discovery features for this option.
- Manually Configuring the 3G/4G/LTE WWAN Profile
- Using the 3G/4G/LTE WWAN Wizard
- Configuring Load Balancing among Multiple USB Modems
Was This Article Helpful?
Help us to improve our support portal