Secure Mobile Access 12.4 Administration Guide

Technical Documentation>  Installation>  Installation and Initial Setup>  Installation and Deployment Process>  Front Panel Controls and Indicators>  SMA 6200/6210/7200/7210 Front Panels
Table of Contents

SMA 6200/6210/7200/7210 Front Panels

The power button is at the bottom, right corner of the front panel.

Front panels of the SMA 6200,6210 and SMA 7200,7210

Controls and indicators on the front panels
Item Description
Hard Drive modules Dual hard drives.
LCD display screen and controls

Displays status and configuration about the appliance. Keypad buttons are used to display appliance status and configure initial settings:
Console port Connects the appliance to a personal computer with an Ethernet cable.
USB ports There are two USB ports.
LED indicators

From top to bottom, the LED indicators are:

  • Hard disk drive activity

  • Alarm

  • Test

  • Power 1 and 2:

    • Blue: Operating correctly

    • Yellow: Unconnected power supply or failure
DIAG port Diagnostics port.
X0: Internal network Connects the appliance to your internal network.
X1: External network Connects the appliance to your external network.
X2: Cluster interface In SMA 12, the X2 interface is no longer supported for clustering. See Deprecated Features.
X3-X5 Not used.
X6 SFP+: Internal network Connects the appliance to your internal 10Gb network.
X7 SFP+: External network Connects the appliance to your external 10Gb network.