Configuring Device VPN

To configure Device VPN

1. In the AMC, navigate to System Configuration > Services.

2. In the Access Services section, under Network tunnel service area, click Configure.

   The Network Tunnel Service page displays.

3. In the Device VPN section, click the Edit.

   

4. Select the Enable Device VPN checkbox and choose the realm from the drop-down to which you want to connect the devices.

   

5. In the Device VPN Communities group, select the user communities that needs to be provisioned to use the Device VPN. The selected communities alone can access the Device VPN.

   

   1. Set the User VPN options as required:

      Options	Description
      Use Device VPN	To enable Device VPN for this Community.
      Allow user to disconnect	To allow user to disconnect from current session. This setting takes precedence over Always On VPN configuration.
      Restrict network access to VPN	To restrict network access to the users until VPN is completely connected.
      Do not connect on secure network	To enable users to bypass entering VPN credentials for User VPN, when the client machine is powered on or restarts in secure network.

   2. Click OK.

6. Click Save.