• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Exporting and Importing Firewall Configurations
  • Github Repository
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Supported NSv Models
  • Resizing NSv Virtual Machine
  • Task List for NSv Instance Setup
  • Deploying AWS from Console
  • Deploying AWS from Cloud Template
  • Accessing the SonicWall NSv Web Interface
  • Forwarding Traffic to your NSv
  • Configuring Internet/Public Access Through the NSv
  • SonicWall Nsv Firewall on AWS GovCloud
    • Deploying AWS Government Cloud from Console
    • Configuring Security Profile
    • Applying Security Services on Policies in NSv for Outbound Traffic
    • Deploying Windows 10 from Console
    • Creating a Security Policy and NAT Policy for Inbound RDP to the VM
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • PAYG Installation Errors
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine as BYOL from SonicOS
  • Registering the NSv Virtual Machine as PAYG
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the Management Console with SSH
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Locking and Unlocking the Management Console
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Forwarding Traffic to your NSv

After installing and registering the NSv, the next step is to configure routing of the LAN subnet so that the traffic is forwarded through the NSv.

To configure routing

1. Navigate to the VPC Dashboard and click Route Tables in the left navigation pane.

   

2. Select the row for which the Main column displays Yes and the VPC column displays the VPC where the NSv instance is configured.

3. Select the Routes tab in the lower pane.

4. Click Edit. The lower pane display changes.

5. Click Add another route. A new row is displayed in the table.

   

6. For Destination, enter 0.0.0.0/0 to match all traffic.

7. For Target, type eni- to display a drop-down menu with available ENIs and then select the eth1 ENI for your NSv.

8. Click Save.

Proceed to Configuring Internet/Public Access Through the NSv.