Switch Administration Guide
Table of Contents
Backup/Restore Configuration
|
Destination Model → Source Model ↓ |
SWS12-8 | SWS12-8PoE | SWS12-10FPoE | SWS14-24 | SWS14-24FPoE | SWS14-48 | SWS14-48FPoE |
| SWS12-8 | YES | NO | NO | NO | NO | NO | NO |
| SWS12-8PoE | NO | YES | NO | NO | NO | NO | NO |
| SWS12-10FPoE | NO | NO | YES | NO | NO | NO | NO |
| SWS14-24 | NO | NO | NO | YES | NO | NO | NO |
| SWS14-24FPoE | NO | NO | NO | NO | YES | NO | NO |
| SWS14-48 | NO | NO | NO | NO | NO | YES | NO |
| SWS14-48FPoE | NO | NO | NO | NO | NO | NO | YES |
Backup and restore configuration are used to take configuration backups and restore the working configurations if things go wrong.
-
Login to switch and Navigate to System-> Backup/Restore. To take configuration backup select the Backup radio button and click on Apply.
-
Login to switch and Navigate to System-> Backup/Restore. To restore the configuration, select the Restore radio button, browse, and select the configuration which needs to be restored and click on Apply. Switch will get rebooted and configurations will be applied.
