Basic Information

To add basic information of a VPN topology

1. Enter a Topology Name to identify.
2. Enter a short description to identify the topology.

3. Choose a Topology Type

   Hub and Spoke	The network design where the central device is located.
   Full Mesh	It provides a connection from each node to every other node on the network.
   Point to Point	This connects two nodes directly together with a common link.

4. Select the IP Version.

   IPV4	32-Bit IP address which is numeric.
   IPV6	128-Bit IP address which is alpha-numeric.

5. Select the Policy Type.

   Site to Site	Choose this option if there is a connection between two or more networks.
   Tunnel Interface	Choose this option to create connection between peers and Virtual Tunnel Interfaces.