Switch 1.1 Release Notes
Version 1.1.1.0
May 2022
Compatibility and Installation Notes
The SonicWall Switch 1.1.1.0 release is supported on all SonicWall Switch platforms:
- SWS12-8
- SWS12-8POE
- SWS12-10FPOE
- SWS14-24
- SWS14-24FPOE
- SWS14-48
- SWS14-48FPOE
For information about obtaining the latest Switch firmware and upgrading the firmware image on your SonicWall Switch, see the Switch Getting Started Guide available on the Support portal at: Switch Getting Started Guide.
New Features
| Issue ID | Issue Description |
|---|---|
| SWO-1415 | Adding MIB File support for SonicWall Switches. |
| SWO-1365 | Backup and restore switch configuration locally. |
Resolved Issues
| Issue ID | Issue Description |
|---|---|
| SWO-1597 | Network table IP entry shows 5 octets of IPv4 address when same value is used for all octates. |
| SWO-1432 | SNMP pages are not loading on Switch UI when using Get Command. |
| SWO-821 | Adding the SNMP settings related tabs on the Switch UI. |
| SWO-648 | Backup and Restore Configuration option on Standalone Switch UI. |
Known Issues
| Issue ID | Issue Description |
|---|---|
| SWO-1705 | Issue in adding Target Address under SNMP. |
| SWO-1703 | No option to edit Users under SNMP. |
| SWO-1702 | Unable to delete group List under SNMP tab. |
| SWO-1696 | Restoring switch configuration from one model to another model is not supported currently. |
| SWO-1695 | Restoring switch configuration does not work intermittently. |
Was This Article Helpful?
Help us to improve our support portal