• Capture Security Appliance
• Introduction
• Technical Overview
• Deployment Examples
• Prerequisites for CSa Deployment
• High-Level Task List
• Hardware Overview
• Connect and Power On
• Change the Administrator Password
• Initial Setup Using Web Management
• Register and License
• Upgrade the Firmware
• Configure Allowed Devices
• Related Documents for Additional Configuration
• Creating a MySonicWall Account
• SonicWall Support
  • About This Document

Related Documents for Additional Configuration

For information about additional configuration of your Capture Security Appliance, such as configuring users and user roles, and setting up reporting, refer to the:

• Capture Security Appliance Administration Guide

Instructions for configuring your firewall to connect to and communicate with the Capture Security Appliance are available in the following SonicOS and SonicOSX documentation:

• SonicOS/X 7 Capture ATP Administration Guide
• SonicOS 6.5 Security Configuration Administration Guide, under Capture ATP

For information about configuring Email Security to use the Capture Security Appliance, refer to the:

• Email Security 10.0 Administration Guide

These administration guides are available on the SonicWall Technical Documentation portal at https://www.sonicwall.com/support/technical-documentation. Filter by product, document type and version, or use the Search field to locate these documents.

For information about using the Capture ATP API, go to https://github.com/sonicwall.