Capture Security Appliance Getting Started Guide
- Capture Security Appliance
- Introduction
- Technical Overview
- Deployment Examples
- Prerequisites for CSa Deployment
- High-Level Task List
- Hardware Overview
- Connect and Power On
- Change the Administrator Password
- Initial Setup Using Web Management
- Register and License
- Upgrade the Firmware
- Configure Allowed Devices
- Related Documents for Additional Configuration
- Creating a MySonicWall Account
- SonicWall Support
Prerequisites for CSa Deployment
The following SonicWall appliances and versions are supported in a Capture Security Appliance deployment:
- Capture Security Appliance running 1.2.0 or newer
- Firewalls running SonicOS/X 7.0.0 or newer
- Firewalls running SonicOS 6.5.4.6 or newer
- Email Security running 10.0.6 or newer
Additional prerequisites include:
- MySonicWall account
- Intelligence Updates license for the CSa
- REST API license for the CSa, if using REST API from an API Connector
- Capture ATP license on firewalls and Email Security
Was This Article Helpful?
Help us to improve our support portal