Wireless Network Manager Release Notes
Version 4.2.0
January 2023
Important
- WiFi Cloud Manager (WCM) has been renamed to Wireless Network Manager.
-
SonicWall Wireless Network Manager components must be registered on MySonicWall to enable full functionality and the benefits of Wireless Network Manager services, updates, and technical support. Log in or register for a MySonicWall account at https://mysonicwall.com.
-
Standard SonicWave access points include Secure WiFi wireless cloud and support services. Additional advanced wireless cloud and security subscription services, including Capture ATP, Content Filtering Service, Cloud Gateway Anti-Virus, and Geo-IP and Botnet Security Services are available for purchase separately at MySonicWall. After logging in, navigate to Product Management > My Products.
Compatibility and Installation Notes
The following compatibility and installation notes apply to this release of Wireless Network Manager.
Browser Requirements
For Wireless Network Manager use the latest browser with HTML5 support.
Supported SonicWave Access Points
Wireless Network Manager 4.4 is supported for the following SonicWall SonicWave wireless access points:
| SonicWave 200 Series | SonicWave 400 Series | SonicWave 600 Series |
|---|---|---|
|
|
|
The SonicWave access points require the following minimum SonicWave firmware build levels:
- For SonicWave 200 Series, the minimum build level is 9.2.4.2-5.
- For SonicWave 400 Series, the minimum build level is 9.1.4.2-5.
- For SonicWave 600 Series, the minimum build level is 9.6.4.5-5.
Supported SonicWall Switches
Wireless Network Manager 4.4 is supported for the following SonicWall Switches:
| Switch SWS12 Series | Switch SWS14 Series |
|---|---|
|
|
Switch management support requires SonicWall Switch firmware version 1.2.0.0-5 or later.
What's New
-
Wireless Security Policy schedule support - Schedule the corresponding security policy at a specified time or periodically.
-
Clients - Edit client friendly name, Kickoff client, and add client to special address group.
-
User Quota control - Allows you to control the usage based on the user’s account.
Resolved Issues
| Issue ID | Issue Description |
|---|---|
| WSC-4256 | Fixed an issue with WPA3 MulPSK H2E for STA fails to connect into Sonicwave200. |
| WSC-4262 | Low signal strength randomly on 2.4Ghz and 5Ghz. |
| WSC-4270 | Unable to connect to LDAP server through TLS from the Guest SSID. |
| WSC-4281 | RF monitor page remains empty when there is related info on Access Points. |
Known Issues
| Issue ID | Issue Description |
|---|---|
| WSC-4301 | The port's color is incorrect on device page when the speed is changed. |
| WSC-4319 | Switch does not appear in the device list when transferring the tenants. |
| WSC-4334 | USB0 interface does not appear when plugged to 4G USB. |
Additional References
WSC-4264
Was This Article Helpful?
Help us to improve our support portal