SonicOS/X 7.0.1 Release Notes

Technical Documentation > SonicOS/X 7.0.1 Release Notes > SonicWall SonicOS 7.0.1 > Version 7.0.1-5080 September 2022

Version 7.0.1-5080 September 2022

September 2022

This version of SonicOS 7.0.1 is a maintenance release for existing platforms and resolves issues found in previous releases.

Important

Starting with SonicOS 7.0.1-5080, the user is forced to change the default password after the first login on the following firewalls: NSa 4700, NSa 5700, NSa 6700, NSsp 10700 NSsp 11700 and NSsp 13700.

Supported Platforms

The platform-specific versions for this unified release are all the same:

Platform	Firmware Version
TZ Series	7.0.1-5080
NSa Series	7.0.1-5080
NSv Series	7.0.1-5080
NSsp Series	7.0.1-5080

NSa 2700
NSa 3700
NSa 4700
NSa 5700
NSa 6700

NSsp 10700
NSsp 11700
NSsp 13700

TZ270 / TZ270W
TZ370 / TZ370W
TZ470 / TZ470W
TZ570 / TZ570W
TZ570P
TZ670

NSv 270
NSv 470
NSv 870

SonicOS NSv deployments are supported on the following platforms:

AWS (BYOL and PAYG)
Microsoft Azure (BYOL)
VMware ESXi
Microsoft Hyper-V
Linux KVM

Resolved Issues

Issue ID	Issue Description
GEN7-28226	When using the web management interface, the values in the table in the DHCP section cannot be sorted using the column headers.
GEN7-28491	Using the special character "(" is not accepted in a VPN name.
GEN7-29640	When importing settings using the Migration Tool, Switch settings are not imported.
GEN7-30386	Group memberships set locally may not be displayed in the web management interface for an imported LDAP user associated with Any domain.
GEN&-30450	An LDAP user cannot change their expired password using the Virtual Office portal.
GEN7-30509	Booting uploaded firmware in a High Availability pair succeeds, but triggers an audit log that indicates that upload has failed.
GEN7-30836	When a login fails through a mobile connection on a password change that did not meet the requirements, subsequent connections will fail until the original SSL session times out.
GEN7-30874	An Aggressive mode VPN Tunnel on a DHCP WAN interface does not negotiate after the network security appliance is restarted in a WAN Load Balancing environment.
GEN7-30959	NetExtender may connect slowly and frequently disconnect when there is heavy SSL VPN usage.
GEN7-31374	When the network security appliance is restarted, a new dynamic scope from `0.0.0.1` to `0.0.0.254` is created if W0 is under Native Bridge mode.
GEN7-31453	Custom static routes are not automatically disabled when a WAN probe fails and goes into failover.
GEN7-31492	A High Availability state synchronization can be triggered, causing the backup unit to restart, if the requested connection uses a WAN load-balanced interface.
GEN7-31588	On the Device > Log > Settings page the toggle buttons to disable or apply to all categories whether a log is sent to a given resource does not work as expected.
GEN7-31660	An UDP session was being enabled for RDP sessions connected through NetExtender, causing severe packets loss and, eventually, disconnection.
GEN7-31760	Settings cannot be exported after deleting or editing a custom zone.
GEN7-31820	Link Aggregation Control Protocol (LACP) does not function as expected on interfaces above X32.
GEN7-31846	Configuring Bandwidth Management and using Tunnel All mode in SSL VPN may degrade throughput on the network security appliance.
GEN7-31850	Custom Routes on the WAN are not disabled when the WAN Logical Probes Fail in a WAN Load Balancing setup.
GEN7-31884	If more than one login to the command-line interface (CLI) using SSH is attempted simultaneously when using RADIUS, LDAP, or TACACS+ authentication, the user groups list may no longer be valid after the first authentication is completed. This condition may cause a disruption of network traffic and loss of access to the web management interface.
GEN7-31900	Configuration changes on the DoS Action Profile page are not listed in the log files and cannot be audited.
GEN7-31907	Some third-party switches may have different default configurations for 1000BASE-X auto-negotiation without the option to bypass auto- negotiation, which may cause the connection to SonicWall to fail.
GEN7-31909	The User Status page does not display the active Terminal Services Agent (TSA) identified users.
GEN7-32311	DPI-SSL does not works properly when an interface is in Layer 2 bridge mode and when the Never route traffic on this bridge-pair option is disabled.
GEN7-32325	The SSL VPN portal displays multiple domains incorrectly in the drop-down list.
GEN7-32331	With the maximum number of SSH sessions established and new sessions being attempted, the SSH daemon thread and web server may stop working if a change to the interface or a similar event occurred at the same time.
GEN7-32338	The SonicWall DHCP server does not handle DHCP Relay Information Option (option 82) in the DHCP relay.
GEN7-32347	A SNMP get of `getDeviceInfo` returns an invalid object identifier.
GEN7-32348	A network security appliance may restart in a High Availability environment with a very large number of active users.
GEN7-32349	A buffer underrun in the DP-engine might be seen in the Topology section of the web management interface.
GEN7-32549	After an upgrade to the firmware, the SSL Server certificate may not be imported, causing the DPI-SSL server to stop working.
GEN7-32578	Administrators may be unable to edit the Log Automation page when using a mixed schedule object.
GEN7-32602	DNS packets may be dropped when UDP Flood Protection is running.
GEN7-32667	After restoring the backup configuration, the WLAN PSK passphrase cannot be changed, displaying the error message: `WLAN authentication type: Invalid`.
GEN7-32718	The settings of a WPA-state machine can become corrupted if a group key renewal occurs during an unscheduled update window. Wireless users may be unable to connect after the schedule is reactivated.
GEN7-33058	On the Users > Settings page, on the User Sessions tab, configuring For other unidentified connections to Log user name with a value that is 8 multiples of the value may cause an overrun.
GEN7-33083	SNMP monitoring may not operate for secondary WAN interfaces.
GEN7-33237	After importing settings, administrators may not be able to disable PortShield, resulting in the error: Failed: `Disabled PortShield port cannot be switched out of PortShield`.
GEN7-33361	Forcing the speed of a 1G Copper port may cause link up issues.
GEN7-33489	Forcing the speed of a 1G Copper port may cause link up issues.
GEN7-34407	When a storage module is replaced, the firewall fails to start up and displays a fatal error.

Additional References

The following additional resolved issues in this release are listed here for reference:

GEN7-5535, GEN7-19446, GEN7-23006, GEN7-24617, GEN7-24696, GEN7-24950, GEN7-25844, GEN7-26264, GEN7-26321, GEN7-26806, GEN7-27200, GEN7-27511, GEN7-28004, GEN7-28117, GEN7-28405, GEN7-28691, GEN7-28771, GEN7-28781, GEN7-28804, GEN7-29052, GEN7-29255, GEN7-29354, GEN7-29357, GEN7-29377, GEN7-29416, GEN7-29612, GEN7-29647, GEN7-29832, GEN7-30328, GEN7-30365, GEN7-30446, GEN7-30451, GEN7-30474, GEN7-30480, GEN7-30508, GEN7-30536, GEN7-30587, GEN7-30617, GEN7-30677, GEN7-30678, GEN7-30695, GEN7-30697, GEN7-30823, GEN7-30876, GEN7-30888, GEN7-30890, GEN7-31017, GEN7-31035, GEN7-31045, GEN7-31072, GEN7-31111, GEN7-31130, GEN7-31220, GEN7-31225, GEN7-31226, GEN7-31239, GEN7-31246, GEN7-31259, GEN7-31270, GEN7-31290, GEN7-31314, GEN7-31316, GEN7-31331, GEN7-31371, GEN7-31485, GEN7-31604, GEN7-31608, GEN7-31611, GEN7-31617, GEN7-31683, GEN7-31687, GEN7-31769, GEN7-31772, GEN7-31776, GEN7-31848, GEN7-31851, GEN7-31906, GEN7-31953, GEN7-31989, GEN7-32053, GEN7-32101, GEN7-32107, GEN7-32116, GEN7-32153, GEN7-32158, GEN7-32250, GEN7-32381

Known Issues

Issue ID	Issue Description
GEN7-33502	The Local and Peer IKE ID cannot be deleted on an IPv4 or IPv6 VPN policy
GEN7-33585	IPv6 VPN is not working when on a VLAN interface.
GEN7-33850	PPPoE IPv6 WAN traffic may drop because IPV6 NDP entries are not getting updated. Restart the network security appliance.
GEN7-33981	Disabling and then re-enabling the Enable VPN setting on the Settings tab on the Network > IPSec VPN > Rules and Settings page results in all VPN policies being shown as disabled.
GEN7-34391	A client system may be unable to obtain a IPv6 address from a DHCP v6 Server through the IP-Helper relay policy.

< Previous Section Next Section >

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really