• High Availability
  • About High Availability
    • High Availability Terminology
    • High Availability Modes
    • High Availability Encryption
    • Crash Detection
    • Virtual MAC Address
    • Dynamic WAN Interfaces with PPPoE HA
    • Stateful Synchronization with DHCP
    • Stateful Synchronization with DNS Proxy
    • About HA Monitoring
  • About Active/Standby HA
    • Benefits of Active/Standby HA
    • Working of Active/Standby HA
  • About Stateful Synchronization
    • Benefits of Stateful Synchronization
    • How Does Stateful Synchronization Work?
    • Example of Stateful Synchronization
  • Active/Standby and Active/Active DPI Prerequisites
    • Supported Platforms and Licensing for HA
    • Physically Connecting Your Security Appliances
    • Connecting the Active/Active DPI Interfaces for Active/Active DPI
  • Maintenance
    • Removing an HA Association
    • Replacing a SonicWall Security Appliance
      • Replacing an HA Primary Unit
      • Replacing an HA Secondary Unit
• High Availability Status
  • Active/Standby High Availability Status
    • High Availability Status
    • High Availability Config
    • High Availability Licenses
• Configuring High Availability
  • Configuring Active/Standby High Availability Settings
  • Configuring HA with Dynamic WAN Interfaces
  • Configuring Network DHCP and Interface Settings
    • Disabling the SonicOS DHCP Server
    • Configuring Virtual IP Addresses
    • Configuring Redundant Ports
• Fine Tuning High Availability
  • Advanced Settings
  • Configuring Advanced High Availability Settings
• Monitoring High Availability
  • Configuring Active/Standby High Availability Monitoring
  • IPv6 High Availability Monitoring
  • IPv6 HA Monitoring Considerations
• SonicWall Support
  • About This Document

Active/Standby High Availability Status

Active/Standby High Availability provides basic high availability with the configuration of two identical firewalls as a High Availability pair. On a firewall that belongs to an Active/Standby HA pair, the DEVICE | High Availability > Status page displays information about the state, configuration, and licenses on the HA pair.

• High Availability Status
• High Availability Config
• High Availability Licenses