• Network Security Manager On-Premises
• Overview
  • About NSM
  • Related Documents
  • Conventions
    • UI Conventions
    • Guide Conventions
• Before Starting
  • Installation Quick Start
  • Prerequisites
  • Supported Firewalls
  • System Requirements
    • Capacity Requirements
    • Scaling Up
    • Licensing Model
  • Creating an MSW Account
  • Obtaining the Image
    • Obtaining a New Licensed Image
    • Obtaining a Trial Version
    • Downloading NSM for an Existing Instance
• Installing NSM on ESXi Server
  • Installing on ESXi Server
  • Connecting to the Console from ESXI
• Installing NSM on Hyper-V
  • Preparing the Windows Server System
  • Installing NSM On-Premises on Hyper-V
  • Connecting to the Console from Hyper-V
• Installing NSM on KVM
  • Preparing the KVM Server
  • Installing KVM
  • Deploying NSM on KVM
• Installing NSM on Azure
• NSM Settings and Registration
  • Configuring NSM Network Settings
  • Registering NSM
  • Associating Firewalls on MSW
  • Unregistering NSM
• Console Operations
  • Management Console Operations
  • NSM Management Console Menu
  • Using SafeMode on the Management Console
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring Network Interfaces in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Installing a Software Upgrade in SafeMode
    • Downloading Logs in SafeMode
• Using NSM
  • Interface Overview
  • Dashboard
  • Creating a Tenant
  • Creating a New User
  • Adding a Device
• Integrate On-Prem Analytics with NSM
• Upgrade Instructions
  • Upgrade Using Management Console
  • Upgrading SonicOS Firmware
• SonicWall Support
  • About This Document

Disabling an Interface

You can disable an interface while in SafeMode.

To disable an interface

1. In the SafeMode Network Interfaces screen, select the Network interfaces option.

2. Select the interface you wish to edit and press Enter.

   The IPv4 and IPv6 addresses, Netmask, MAC address, Gateway, and DNS settings are displayed on the screen above the interface selection dialog.

3. For example, select IPv4 Address and press Enter.

   The on-screen dialog displays the current IP address.

4. Navigate into the dialog and change the IP address to 0.0.0.0, then press Enter.

   

5. Press Tab to select the Save changes button and then press Enter.

   

6. The interface is disabled.

Disabling DHCP may be sufficient to disable the interface.