Network Security Manager 3.2 On-Premises Getting Started Guide

Technical Documentation>  Installating Network Security Manager>  Installing NSM on HyperV>  Connecting to Console
Table of Contents

Connecting to Console

You can easily use the Command Line Interface to view and configure various parameters for NSM. It can also be used for diagnostics. When using Hyper-V you can connect to the CLI Console in the following way:

  • Using the Hyper-V remote console to access the NSM On-Premises command line interface

    In the following procedure, the public IP address is the WAN IP address appearing in Hyper-V Virtual Machine Connection.

To connect to the management console through the Hyper-V Manager

  1. Bring up the Hyper-V Manager, select the NSM On-Premises instance with a left-click and then right-click to select Connect.

  2. After the VM boots up, the CLI Management Console appears.

For details on the commands, refer Command Line Interface