Network Security Manager 3.2 On-Premises Getting Started Guide

Technical Documentation>  Command Line Interface>  CLI Commands>  Configuration Commands
Table of Contents

Configuration Commands

OBJECTIVE SYNTAX RESULT
Configure Network network interface <interface name> ip <ip addr> netmask <netmask> gateway <gateway> CLI should display a Success Message.
Configure DNS dns primary <dns> secondary <dns> CLI should display a Success Message.
Configure Host-IP Mapping host add <hostname> <ipaddress>

 

host delete <ipaddr>

CLI should display a Success Message.
Configure DHCP dhcp interface <interface name> CLI should display a Success Message.
Configure Update Channel update-channel set <channel name> CLI should display a Success Message.
Enable Auto Update auto-update enable CLI should display a Success Message and the auto-update time.
Disable Auto Update auto-update disable CLI should display a Success Message.
Configure Auto Update auto-update set <day> <hh:mm> <timezone> CLI should display a Success Message.
Configure Date date set “mm/dd/yyyy HH:MM:SS” CLI should display a Success Message.