03/26/2020 79 People found this article helpful 456,224 Views
WXA: VLAN Config Example
Procedure:
Figure 1 Overview of network setup |
NSA3600 is running 6.1.1.x
Please Note: WXA can be connected to a Sub Interface/VLAN on the firewall
Figure 2 Interfaces page with VLAN 1099 off X2 |
Figure 3 Here is the DHCP scope |
Figure 4 Switch interface 27 connected to 3600 port X2 |
Tagged VLAN from NSA 3600 is 1099, the untagged traffic is 2002. Untagged traffic from this interface will adopt the tag of 2002.
Figure 5 Switch interface 16 allows trunk port 1080 to 1100 |
VM “WXA 5000-N4” is on VLAN 1099
This is for my ESX server which allows “trunk” access for VLAN 1080 to 1100
Figure 7 Network configuration on ESX |
Figure 6 Test PC on VLAN 2002 |
Just for completeness the VLAN used to test the WXAs were on VLAN 2002