SRA/SMA How to configure ping interval for WAN LAN monitoring addresses in HA
03/26/2020 8 12202
DESCRIPTION: SRA/SMA How to configure ping interval for WAN LAN monitoring addresses in HA
In order to configure the time interval that governs how often WAN/LAN monitoring IP addresses are pinged follow the steps below:
1. Go to High availability
2. Under High availability settings input the desired Heartbeat interval(ms). This field is used BOTH for sending heartbeat between the primary and secondary units and also for pinging the WAN/LAN monitoring addresses. Default value is set to 500ms which is the minimum but can be increased up to 300,000 miliseconds (5 minutes).
Failover trigger level can also be configured which indicates how many pings have to fail before the failover occurs. The value can be set to anything from 4 to 99.