Email Security: How to connect Email Security device using a console cable?
How to connect Email Security device using a console cable?
Step 1: Connect the Email security Device and a PC using a Console cable. Step 2: Open up Hyper Terminal i.e Program files -> Accessories -> Communication -> Hyper Terminal. Step 3: Create a new connection, you can give any name. e.g. (SonicWall CLI Testing) Step 4: After that select the com port on which you have connected the Email Security device. e.g. (Com 1) Step 5: Click on OK
Step 6: Select the port settings as shown above and click OK
i.e Bits per second -115200
Data bits - 8
Stop bits -1
No Flow control
Step 7: You would see a LOGIN: enter your login name and than PASSWORD: your password. Step 8: You should see SNWLCLI> You are in.