X-Series Solution and SonicPoints

Ports on an extended switch can be portshielded to the WLAN zone of the appliance, and SonicPoints can be connected to these ports.

When connecting SonicPoints to an X-Series switch, it is important to consider the SonicPoint's power requirements. A SonicPoint ACe/ACi/N2 requires a minimum of 25.5 watts. If your switch model does not support PoE+, you must use a SonicPoint power injector. For which switches support PoE+, see PoE/PoE+ and SFP/SFP+ Support. For more information about managing SonicPoints, see the Knowledge Base article; SonicWall TZ Series and SonicWall X-Series Solution managing SonicPoint ACe/ACi/N2 access points.