SonicOS 7 System

Technical Documentation>  Dynamic Routing>  OSPFv3
Table of Contents

OSPFv3

NETWORK | System > Dynamic Routing > OSPFv3, which displays only when Advanced Routing Mode is enabled on the Settings tab, shows the status of OSPFv3 and allows you to configure OSPFv3 for an interface.

Settings Icon that displays the Settings pop-up for configuring the metrics for default routes. See General Settings.
Interface (Zone) Interfaces and their zone configured for OSPFv3. If a zone has not been configured for an interface, the (Zone) designation is (N/A).
OSPFv3

Indicates whether OSPFv3 is enabled on an interface:

  • OSPFv3 Enabled
  • OSPFv3 Enabled (passive)
  • OSPFv3 Disabled
Configure OSPFv3 Displays the Edit icon for the interface.
OSPFv3 Neighbor Status Displays the Status icon, which indicates whether there are active or inactive neighbors; clicking the icon displays the Interface OSPFv3 Area Neighbors pop-up for more detail about the interface’s neighbors. See NETWORK | System > Dynamic Routing > OSPFv3> Interface OSPFv3 Neighbors.

Interface OSPFv3 Neighbors

Display this pop-up by clicking the Status icon for the interface. (OSPFv3 must be enabled on the Configuration dialog.)

Router-ID Neighbor’s router ID.
Current State

State of the OSPFv3 neighborhood when it is established:

  • Init
  • 2-way
  • ExStart
  • Exchange
  • Loading
  • Full
Priority Neighbor’s router’s priority.