Configuring PortShield Interfaces on NETWORK | System > Interfaces

For a port to be an interface, it must be configured with an IP address. Otherwise, the port is not listed in PortShield Interface.

To configure a PortShield interface

1. Navigate to NETWORK | System > Interfaces.
2. In the Interface Settings table, click the Edit this entry icon for the interface you want to configure. The Edit Interface dialog displays.

3. From Zone, select on a zone type option to which you want to map the interface. More options display.

You can add PortShield interfaces only to Trusted, Public, and Wireless zones.

4. In the Mode / IP Assignment drop-down menu, select PortShield Switch Mode. The options change again.
5. From PortShield to, select the interface you want to map this port to. Only ports that match the zone you have selected are displayed.
6. Click OK.