Enabling Wireless LAN

To enable the visibility of Wireless LAN

Enabling or disabling the Wireless LAN feature requires a restart of the firewall.

When WLAN is disabled:

• All access point and wireless-related management interface pages do not display.
• WLAN is not displayed as a zone type.
• Any existing WLAN zones or objects become uneditable.
1. From Wireless Controller Mode, select the controller mode:
   • Full- Feature-Gateway- acts as centralized hubs for device management, supporting multiple communication protocols.
   • Non- Wireless- Non-wireless systems rely on physical connections.

   • Wireless Controller Only- uses a dedicated controller for direct, wireless management of devices.

     To know more on the effects of the wireless controller mode see Effect of Wireless Controller Modes.

2. Click OK.