Wireless Network Manager Administration Guide

Technical Documentation>  Managing Your Network>  Devices>  Managing Access Points>  SonicWave Diagnostics>  Testing Connectivity With Your Gateway or DNS Addresses
Table of Contents

Testing Connectivity With Your Gateway or DNS Addresses

You can test the connectivity of the SonicWave with your gateway or DNS addresses.

To test the connectivity of a SonicWave with your gateway or DNS addresses

  1. Navigate to the Network > Devices pages.

  2. On the row for the device you want to test, hover over the far right area until the configuration icons appear.

    The device must be online.

  3. Select the Diagnostics (Magnifier) icon. the Diagnose SonicWave page displays.
  4. Specify the Target (host name or IP address).
  5. In the Gateway, DNS Server Connectivity section, click Test next to the diagnostic test you want to run. The results will be displayed next to that Test button.
  6. Click Close to close the Diagnose SonicWave page.